ABS Mounting Brackets

Bond straight to the roof with no holes to drill and no seal to maintain. Light, UV stable, right for composite and pop-top roofs.

Rekcharge 6 Piece Black Solar Panel Mounting Bracket Kit

Regular price$45⁰⁰

View details
Rekcharge 7 Piece ABS Solar Panel Mounting Bracket Kit with Cable Entry

Regular price$65⁰⁰

View details
Rekcharge 6 Piece White ABS Solar Panel Mounting Bracket Kit

Regular price$50⁰⁰

View details

ABS Mounting Brackets

Overview

ABS Mounting Brackets Overview

About ABS Mounting Brackets

Every bolt that goes through a roof is a seal you have signed up to maintain for the life of the vehicle. Sealant moves, UV works on it, and the fixing that was watertight in the driveway becomes your problem again in a few years.

Bonded ABS brackets sidestep that. Nothing passes through the skin, so there is nothing to reseal, nothing to chase with a torch when a damp patch appears in the ceiling lining, and nothing to explain to the next owner. On a composite caravan roof or a pop-top, that argument usually decides it on its own.

The material suits the job. ABS is light, holds up to UV without going chalky or brittle, and takes a structural polyurethane adhesive well. Scuff both faces, clean them properly, use an adhesive actually rated for structural bonding, and the joint will outlast the panel it is holding.

The limit is load. ABS is right for panels up to a moderate size on a roof that is not copping constant heavy corrugations. Past that, an aluminium bracket and a bolt is the honest answer.

Give the adhesive its full cure before the vehicle moves again. It is the only step in the job that costs nothing, and the one most often skipped.

FAQs

ABS Mounting Brackets FAQs

What is the best adhesive to use for ABS solar brackets?

Use a high performance structural adhesive like Sikaflex 252 or a similar polyurethane sealant. These adhesives are specifically designed to bond ABS plastic to metal or fiberglass surfaces, providing a permanent hold that replaces the need for screws or bolts.

Preparation is the most important part of the process. You must thoroughly clean and prime both the bracket and the roof surface to remove any grease or dust before applying the adhesive. This creates a chemical bond that can handle the vibration and heat of Australian travel.

Explore our Solar Panel Mounting Brackets for complete kits, or find a watertight cable entry gland in our Solar Cables & Leads collection.

Are drill-free ABS solar mounts safe for highway speeds?

ABS solar mounts are safe for highway speeds and rough tracks as long as the structural adhesive has been applied to a properly prepared surface. The wide surface area of these brackets is designed to create a massive bonding zone that handles the wind lift and vibrations encountered during long hauls on the bitumen or corrugated outback roads.

Cleaning and priming the roof and the brackets before bonding creates the permanent hold. This drill free method is a standard practice for caravans and campervans because it maintains a watertight seal while providing enough strength to keep the panels locked down.

Compare these with our Aluminium Mounting Brackets for roof rack setups, or find the right Solar Controllers to manage your incoming power.

Do I need to use side brackets for large solar panels?

Adding side brackets is highly recommended for any solar panel over 100 watts. While corner mounts handle the four corners, larger panels can flex in the middle due to wind pressure at high speeds or vibration on corrugated outback tracks.

These extra brackets provide more structural support and a larger bonding surface to distribute the load evenly across your caravan or canopy roof. This prevents the panel from bouncing and reduces the stress on the corner mounts, helping you maintain a secure and permanent bond.

Compare these with our Aluminium Mounting Brackets for mechanical setups, or see our Solar Rooftop Tent Mounts for specialized tent gear.

Are ABS solar mounting brackets UV resistant?

Yes, Roam Gear ABS Solar Mounting Brackets are constructed from high grade, UV resistant plastic designed to withstand the harsh Australian sun. This material is chosen specifically to prevent the brackets from becoming brittle, cracking, or fading after years of exposure on a caravan or canopy roof.

Because these mounts are often used for permanent installations in remote and coastal areas, the UV stability of the plastic is a critical factor in maintaining a secure bond. Using these brackets alongside a quality structural adhesive helps create a long lasting mounting solution that handles heat and sunlight without performance loss.

Explore our full range of solar mounting gear to find the right fit for your off grid setup.