Anderson Plug Angled Surface Mounts

How many leads live at this wall. Angled mounts that bolt to a flat surface and hold one or more plugs, sized by how many leads the wall will need rather than by the plug.

Roam Gear 12V Triple Anderson Surface Mount with 50A Anderson Plugs

Regular price$48⁰⁰

View details
Roam Gear 12V Double Anderson Surface Mount with 50A Anderson Plugs

Regular price$38⁰⁰

View details
Roam Gear 12V Single Anderson Surface Mount with 50A Anderson Plug

Regular price$28⁰⁰

View details

Anderson Plug Angled Surface Mounts

Overview

Anderson Plug Angled Surface Mounts Overview

About Anderson Plug Angled Surface Mounts

How many leads live at this wall.

That is the question a surface mount answers, and it is worth asking before the first hole is drilled. One Anderson plug on the outside of a canopy is the fridge lead. Two is the fridge and the portable panel. Three is those and a trailer, or a second fridge, or the lead for whatever turns up next season. The mount is sized by that count, and a mount with one plug on a wall that needs three is a wall with three holes in it.

Single, double and triple mounts are the same fitting scaled up. Each puts a plug in a housing that bolts to a flat surface, angled so the lead leaves downward and water runs off the contact face rather than into it. The plug is retained, the lead has somewhere to go, and the connection lives on the outside of the vehicle without living in the weather.

Mount them where a lead can reach with a panel deployed or a trailer hitched, and below any lip that sheds water. Count the leads first. Then buy the mount with that many plugs and one spare, because the spare is the one that gets used.

FAQs

Anderson Plug Angled Surface Mounts FAQs

Flush mount vs angled Anderson plug mount: Which is better?

Choose an angled mount if you are fixing the connection to an external surface like a canopy wall or trailer drawbar. The downward orientation helps protect the plug face from rain and dust buildup, which is a common cause of terminal corrosion. These are particularly useful for mounting on the side of a rig where vertical space is available.

If you are fitting out a custom drawer system or internal control panel, a flush mount is often the better choice. It keeps the connection recessed and prevents gear from snagging on the plug while you are moving items around in the back of your vehicle. Both styles provide a secure mechanical fix for high current accessories.

Explore our Anderson Plug Flush Mount Panels for recessed options, or see our full range of Anderson Plugs.

Do I need to drill a large hole for an angled Anderson surface mount?

Angled surface mounts typically only require a small hole for the electrical cable to pass through and a few smaller holes for the mounting screws. Unlike flush mount options, you do not need to cut a large rectangular opening in your vehicle panels. The body of the mount sits entirely on the surface.

This makes them a practical choice for DIY builds where you want a clean installation with minimal drilling. It also allows you to mount the plug on structural frames or thin canopy walls without affecting the integrity of the material. Using the correct wire size is still important for these connections.

Check our full range of Anderson Plugs for your setup, or explore our Battery Cable for the right wiring.

Where is the best place to mount an external Anderson plug for solar?

Install your solar input plug near the rear of the vehicle, on a canopy wall, or near the trailer drawbar. These locations allow you to easily connect a portable panel without running long cables across the ground or through your interior. Positioning the plug in an accessible spot helps you setup your charging quickly.

Using an angled mount in these areas is a smart move because it directs the cable downward, which reduces strain on the plug and naturally sheds water. This setup keeps your fridge and lights running while your vehicle stays parked in the shade. Every solar input should still be managed by a regulator to protect your house battery.

Find the right charge management in our Solar Controllers collection, or see our Portable Solar Panels for mobile power.

Are angled Anderson plug surface mounts waterproof?

These mounts are weather resistant but not fully submersible. The angled design naturally sheds rain and condensation away from the electrical contacts, which helps prevent corrosion and short circuits. While the housing handles splashes and dust, you should still avoid mounting them where pooling water or heavy pressure washing is likely.

Keeping the terminals clean helps your system perform correctly during long term travel. If you are mounting a plug in a very exposed location, using a rubber dust cover provides an extra layer of protection for the internal terminals. This simple step helps maintain a low resistance connection for your accessories.